Intermediate Manufacturing Industrial Maintenance, Certificate

MAFT.CRT.V69

Program Overview

The Intermediate Manufacturing Industrial Maintenance Certificate is designed to develop within the student practical skills in drafting, welding, troubleshooting and repairing electrical circuits, precision measurement, welding and machine tool for an entry-level position in the industrial manufacturing industry. Industrial maintenance positions include, but are not limited to: industrial maintenance technician trainee, industrial maintenance service technician trainee and industrial maintenance PLC technician trainee. Students are required to purchase a minimum set of components and/or tools in some courses.

Additional Program Information

Students who successfully pass all four assessments (MAFT 1112, MAFT 1222, MAFT 1232 and MAFT 1312) will be recognized as a Certified Production Technician (CPT) by the Manufacturing Skill Standards Council (MSSC).

For more information about our graduation rates, the median debt of students who completed the program, and other important information, please visit www.kcc.edu/gainfulemployment/.

Program Requirements

Major Courses

MCHN 1214Machine Tool I

4 Credits

MCHN 1311Precision Measurement

1 Credit

MCHN 1452Lubrication

2 Credits

MCHN 1224Machine Tool II

4 Credits

ELTR 1064Fundamentals of Electricity

4 Credits

ELTR 2074DC & AC Rotating Machines

4 Credits

ELTR 2414Industrial Motor Control

4 Credits

ELTR 2444Programmable Controllers

4 Credits

WELD 1114Basic Welding

4 Credits

Total Credit Hours: 31

Suggested Course Sequence

Fall semester

ELTR 1064Fundamentals of Electricity

4 Credits

WELD 1114Basic Welding

4 Credits

Spring semester

ELTR 2074DC & AC Rotating Machines

4 Credits

MCHN 1311Precision Measurement

1 Credit

MCHN 1452Lubrication

2 Credits

Fall semester

ELTR 2414Industrial Motor Control

4 Credits

MCHN 1214Machine Tool I

4 Credits

Spring semester

ELTR 2444Programmable Controllers

4 Credits

MCHN 1224Machine Tool II

4 Credits

Program Cost

Minimum credit hours required for completion: 31
Tuition and fees: $147.00 per credit hour 147.00
$4,557.00
Lab fees:
ELTR 1064 Fundamentals of Electricity 25.00
ELTR 2074 DC & AC Rotating Machines 25.00
ELTR 2414 Industrial Motor Controls 30.00
ELTR 2444 Industrial PLCS 25.00
MCHN 1214 Machine Tool I 50.00
MCHN 1224 Machine Tool II 50.00
MCHN 1452 Lubrication 15.00
WELD 1114 Basic Welding 100.00
320.00
320.00
Books:
ELTR 1064 Fundamentals of Electricity 106.00
ELTR 2074 DC & AC Rotating Machines 120.55
ELTR 2414 Industrial Motor Controls 282.85
ELTR 2444 Industrial PLCS 140.00
MCHN 1214 Machine Tool I* 213.00
MCHN 1311 Precision Measurement 53.35
WELD 1114 Basic Welding 119.00
1,034.75
 1,034.75
*The same textbook is used for MCHN 1214 and MCHN 1224.
Supplies:
MCHN Courses:
Safety glasses 10.00
Steel rule 5.60
Digital or dial veneer caliper 30.00
45.60
45.60
WELD Courses:
(All supplies are obtainable at Pratt’s except high-top shoes, boots, drafting kit and steel rule.)
#5 filter lens 5.60
Leather welding gloves 8.71
Mild steel wire brush 2.00
Stainless steel brush 4.63
Heavy pliers 16.13
High-top shoes or boots 60.50
Tip cleaner 3.15
Striker 2.50
Welding hood - #10 or 11 filter lens 32.70
Chipping hammer 8.27
Leather welding jacket or sleeves 56.88
Mill jacket 25.46
Welding beany 8.00
Safety glasses 6.05
Steel rule 5.60
2 – 3/32 – 2% Thoriated 5.25
2 – 3/32 – 2% Zirconium 5.95
16’ tape measurer 6.00
Stainless wire brush 4.63
4 – 3/32 E-3TM (Purple) Tungstens 5.25
4 – 3/32 2% Zirconium Tungstens 5.95
Wire Cutters 10.00
11R Vise Grip 15.00
$304.21
304.21
ELTR 2414 12 pc. tool set consisting of the following Ideal Brand tools: 149.99
35-5012 9-1/4 linesman
35-5028 8” diagonal
35-5038 8” long nose
35-5430 10” tongue and groove
45-120 T5 wire stripper
35-193 #1 x 3 phillips
35-194 #2 x 4 phillips
35-184 3/16 x 4 slotted cabinet tip
35-164 ¼ x 4 slotted round shank
35-242 25 ft. auto lock tape measure
10-466 electrician’s leather tool belt
10-398 web belt
35-300 utility knife
36-241 3/32 x 3 cabinet tip
61-063 volt sensor pocket tester
S13390 safety glasses
61-768 660 amp tightsight clamp meter $152.80
61-354 Contractor grade digital multimeter
Free with purchase of clamp meter
302.79
302.79
TOTAL $6,564.35
All prices are subject to change. Please visit Hammes Bookstore for the most up-to-date textbook prices.

Gainful Employment

The U.S. Department of Education requires colleges and universities to disclose certain information for any financial aid eligible program that, “prepares students for gainful employment in a recognized occupation.” Review the GE disclosure for the Intermediate Manufacturing Industrial Maintenance certificate.

Get Started Now

Ready to take the first step? Applying to KCC is quick and easy. Get started today!

Apply Now or Request More Information

Speak to an Advisor
Advisors are available to assist you with general information about KCC’s programs and services.

Call: 815-802-8500
Email: advising@kcc.edu
Monday - Thursday, 8 a.m. - 6 p.m.
Fridays 8 a.m. - 5 p.m.
(closed most Fridays in May, June and July)